The perfect starter system for large or small shops:

• Made in USA with imported Blackhawk Pump <... 

Features and Benefits

• Provides maximum suction power
• 3 Different pad si... 

Being in the automobile business, you may have come across various door-skinning tools, but have you tried this Mini-... 

220V Deluxe Steel Dent Removal System

• 20 foot cord without plug
• Leverag... 

220V Deluxe Steel Dent Removal System

• 20 foot cord without plug
• Leverag... 

Makes A Tough Job Quick & Easy!

• Angled Pin Removal Tool, allows... 

Rail Saver, Accessory Kit and Ram by TG Products
Repairs rails fast, from the inside out. Don't spend t... 

Repairs rails fast, from the inside out. Don't spend time drilling and cutting access holes only to weld them back to... 

• For crease pulling and other similar tasks
  
• ½ lb. Thin "Wiggle Wire", .062 approxi... 

• For Rocker Panels and other similar tasks
  
• 1 lb. Thick "Wiggle Wire", .93 approximately 3... 

THE MAXI is a 220 volt single phase steel dent pulling station that provides the technician with the power they need ... 

• This essential accessory raises "The Maxi" up to hip level and provides storage space for all the accessor... 

Fast and easy to use! Simply hold the tip against a dent, pull the dent out and then twist to remove. The Shark II ha... 

The EZ Hammer is a compact pneumatic hammer with the power to remove dents in normally inaccessible panels. It may al... 

• 110 volts
  
• Compact and powerful
  
• Five times faster than a pin welder

Install a door skin more efficiently with the EZ Hammer Door Skin installation tool. There is no need to swing a ham... 

Glue pullers are an excellent method for removing dings and small dents from OEM paint. When access to the back pane... 

• Made in USA
• Available with fiberglass or wood handled hammers

Listed by Ford as Approved Ha... 

• Made in USA
• Available with fiberglass or wood handled hammers

• Drop forged from high carbon steel: heat treated, quenched and tempered
• Made in USA

... 

• Made in USA
• Available with fiberglass or wood handled hammers

Set Includes... 

• Made in USA
• Available with fiberglass or wood handled hammers

Set Includes... 

• For high crown work and finishing, without poking holes in thin sections
• 6-1/2" overall head le... 

The Martin 17 Piece Body & Fender Repair Tool Set is a pre-packaged toolkit from Martin Tools. This kit includes seve... 

Complete 27 Pc. Hammer & Dolly Set

Tool Set Includes:... 

• Available with Wood or Fiberglass handles
• Made in USA

Set Includes:... 

• Available with Wood or Fiberglass handles
• Made in USA

Set Includes:... 

Fits Various Different Martin Hammers

The Martin Replacement Hammer Handle kit contains... 

Fits Various Different Martin Hammers

The Martin Replac... 

Set includes 5 adjustable hook spanner wrenches along with a kit bag for storage. These wrenches are often used to ti... 

• Medium an... 

The Martin 3-Piece Pick Set is an efficient set of picks made from Martin's line of high-quality tools. The picks are... 

Long handle permits many uses in places otherwise inaccessible.

• Can be driven between reinforcements ... 

• Designed for flat surfaces
• All the features of a toe dolly
• 4-3/4" x 2-1/4" x 11/16... 

• Shaped like a toe dolly but has one face covered with raised serrations for shrinking metal stretched by den... 

• Excellent for finishing
• Cross pein used for working in sharp corners around moldings and for ca... 

• Excellent for finishing
• Cross Peen used for working in sharp corners, around moldings and for c... 

• Excellent for finishing
• Cross pein used for working in sharp corners around moldings and for ca... 

• For bumping where hand and dolly cannot reach
• Ample clearance for obstructions
• Also ... 

• For bumping where hand and dolly cannot reach
• Ample clearance for obstructions
• Also ... 

• Medium size point and reach for general work
• Low crown strawberry point for perfect balance ... 

• Medium size point and reach for general work
• Low crown strawberry point for perfect balance ... 

• For work in close quarters
• Expertly machined serrations on the round face
• 1-1/8" p... 

• For work in close quarters
• Expertly machined serrations on the round face
• 1-1/8" p... 

• Blunt point, short reach
• For low spots in high crown panels and other work with small clearance... 

• Blunt point, short reach
• For low spots in high crown panels and other work with small clearance... 

• Perfect set for sheet metal work
• Set includes heel, railroad, wedge and double end dollies ... 

• Enough pieces to cover most repairs easily.
• Includes 32" Tweeker, 40" Tweeker, 42 1/2" Rod, 36 ... 

The outside corner staple is only produced by Polyvance. These staples fit into most hot staplers on the market.
... 

These staples fit into most hot staplers on the market.
Package of 100

These staples fit into most hot staplers on the market.
Package of 100

These staples fit into most hot staplers on the market.
Package of 100

These staples fit into most hot staplers on the market.
Package of 100

These staples fit into most hot staplers on the market.
Package of 100

Designed to staple the small tabs on Honda bumper covers. It should also work with other slotted tab applications. T... 

Dent Fix Grounding Magnet

350 AMP high strength magnet attaches to ground cable for a co... 

THE MAXI is a 110 volt single phase steel dent pulling station that provides the technician with the power they need ... 

The Spot Annihilator Deluxe kit is the most efficient way to remove spot welds. The tool applies its own cutting with... 

• Made in the USA
• Lifetime warranty

For installing the RP787 Body Loc T-Top 10-Ton Chain Tydowns.

• Made in the USA

· Made in the USA
· Lifetime warranty

• 8"L with 3" Draw
• 6-Ton capacity
• Tighten with an air ratchet
• Elimina... 

Body Loc Frame Clamps Truck Vise Clamps Adaptable to virtually any drive-on machine.

• Made in the... 

• Rugged construction - built for long life and easy construction
• Swivel coupling simplifies hyd... 

• New leverage technology for maximum pull power
  
• Latest technology in Glue Tabs
  

110v Deluxe Steel Dent Removal System

• 20 foot cord without plug
• Leverag... 

The Martin Light Dinging Spoon works well with a dinging hammer to help effectively spread hammer blows. Suitable for... 

The Motor Guard Magna-Spot 1000 Kit helps in removing dents from vehicle surfaces. This kit features the exclusive Lo... 

• Snap lock design for quick, easy assembly
• Automatic pump overload system
• Flex head f... 

Lightweight and portable dent puller. Fixed to the ground through vacuum suction and made of aluminum makes for a li... 

Self-adjusting pulling hook that follows the contour of the dent.

Attaches to a wiggle wire or Keco glue sys... 

Easily replace a worn-out or damaged seal on your Fast Puller™.

• Peel-and-stick application.<... 

• A quality machined dent puller for professional use
• Comes with three different sized vacuum cups... 

The CHAMP Pro Steel Dent Repair System is an all- in one comfortable and convenient mobile workstation. The seated...